Filling-Accessories

Model 057679-410 Cartridge triplex MS-AC MS-P21 Cartridge filtration Bauer Compressors: Junior, Oceanus, Capitano, Mariner 200 and 250. With filter 350 bars Electric Compressor cartridge clip

For P41/42 filter systems. Special BAUER sealing technology provides a sustained vacuum. Consistently high production quality guarantees extended, ...

- For decanting air from one tank to another
- With turn knob pressure relief valve
- Maximum working pressure: 300 bar
- incl pressure gauge

Used to filter air between compressor cylinder fitted with 300 Bar DIN type attachments. Maintained using service kit as shown on the right. Reduces possible cylinder contamination from air fills ensuring a ling cylinder life. Can be used with Nitrox if 0

Oxygen Equalizer DIN 200/300 with flow control with digital OXYGEN Pressure Gauge with battery-powered with good vibration resistance. It is used in gas and liquid medium, suitable for portable equipment,

For decanting air from one tank to another With push button pressure relief valve Maximum working pressure: 300 bar

Accuracy 1% Resolution 0,1% Values in BAR, PSI en Kgf/cm2 and MPA 0 to 250 Bar Size:100mm x 66mm x 37mm

To connect a 200 bar Din connector to a 300 bar tank

Suitable for compressor, fill hose and decanting hose.

Adapter for connecting two first stages on a single valve outlet Fitting: 1x DIN G5/8 to 2x DIN G5/8 Material: Nickel plated brass Maximum working pressure: : 232 bar

For use with an airgun charging adaptor, charging set or charging hose. To allow connection to most type of air guns. Connection: 1/4 -1/4 BSP MALE.

GUE Gas Analysis Tape, Roll

60mm face diameter 300 Bar DIN fitting high pressure contents indicator with push button pressure relief valve. Attaches to cross flow valve to determine cylinder pressure. For use with DIN fitting valves. For surface use only.

Stainless steel Suitable for 200 and 300 Bar DIN Ideal for buffers and fixed installation

Fits on standard Oxygen connection. Converts Bullnose to DIN 200 Bar. Made from solid brass.

For decanting air from one tank to another. With turn knob pressure relief valve. Maximum working pressure: 300 bar. incl pressure gauge.

Fits on Helium en Argon connection. Converts to Din 200 Bar. Made from solid brass. A must the home blender.

To use oxygen flow reducer on stage.

-High pressure hose length 150cm -DIN 200 and 300 connection -Pressure gauge 0-400 Bar -Press releive vent -Connection 1/8

Allows charging of valves fitting the DIN 300 Bar connector by compressors with A-Clamp fitting hoses.

Allows attachment of Regulators with M26 to Din valved cylinder.