McNett / Gear Aid Cure Accelerator 30ml
De beste keus
Wij selecteren alleen de beste productenSnelle verzending
Verzenden met track en traceScherpe prijzen
Betaal dus nooit te veelRuime voorraad
Veel producten standaard op voorraad
Productomschrijving
Cotol-240ª Cleaner Cure Acceleratoris a urethane cure accelerator and pre-cleaner to be used in conjunction with Aquaseal¨or . The solvent cleans and prepares the surface, readying it for Aquaseal¨ , speeding the tack time to 15 minutes and the full cure time to less than two hours. Cotol-240 is also ideal for removing tar, sap, glue, and other resins from various surfaces including glass, plastic and metal. Available in 1/2 oz. Blister Pack, 4 oz. and Quart (not shown). |
Cotol-240ª Directions for usewith Aquaseal¨ Urethane Repair Adhesive and Sealant: AS PRECLEANER: Apply a small amount to the damaged area (spot test for colorfastness). Rub with a clean cloth until dry. Repeat steps 1 and 2. Apply Aquaseal as directed.Note: for best adhesion, first roughen non-fabric surfaces with sandpaper. AS CURE ACCELERATOR: Thoroughly mix 1 part cure accelerator with 3-4 parts Aquaseal¨or using a stick, toothpick, or knife. Mix on a non-absorbent surface such as a plastic lid or plate. Immediately apply the mixture to the damaged area. Allow the repair to completely cure at least 2 hours before using.FOR COLORS: Mix food coloring or paint colorant (available at paint stores) into the Aquasure and cure accelerator before applying. CLEAN-UP: To remove Aquaseal¨ from hands, use cloth soaked with paint thinner, nail polish remover or 99% isopropyl alcohol. STORAGE: Cap tightly. Store in cool, dry place. Use blister card package for storage. |
Reviews
Specificaties
Cure Accelerator 30ml
0 beoordelingenBeoordeel McNett / Gear Aid Cure Accelerator 30ml
Voor Aquasure en Seam Grip.
Verdunt de lijm en versnelt droogproces.
Kleine verpakking.
Hoort th..