Cotol-240ª Cleaner Cure Acceleratoris a urethane cure accelerator and pre-cleaner to be used in conjunction with Aquaseal¨or . The solvent cleans and prepares the surface, readying it for Aquaseal¨ , speeding the tack time to 15 minutes and the full cure time to less than two hours. Cotol-240 is also ideal for removing tar, sap, glue, and other resins from various surfaces including glass, plastic and metal. Available in 1/2 oz. Blister Pack, 4 oz. and Quart (not shown).
Cotol-240ª Directions for usewith Aquaseal¨ Urethane Repair Adhesive and Sealant:
AS PRECLEANER:Apply a small amount to the damaged area (spot test for colorfastness). Rub with a clean cloth until dry. Repeat steps 1 and 2. Apply Aquaseal as directed.
Note: for best adhesion, first roughen non-fabric surfaces with sandpaper.
AS CURE ACCELERATOR:Thoroughly mix 1 part cure accelerator with 3-4 parts Aquaseal¨or using a stick, toothpick, or knife. Mix on a non-absorbent surface such as a plastic lid or plate. Immediately apply the mixture to the damaged area. Allow the repair to completely cure at least 2 hours before using.
FOR COLORS: Mix food coloring or paint colorant (available at paint stores) into the Aquasure and cure accelerator before applying.
CLEAN-UP: To remove Aquaseal¨ from hands, use cloth soaked with paint thinner, nail polish remover or 99% isopropyl alcohol.
STORAGE: Cap tightly. Store in cool, dry place. Use blister card package for storage.
<ul><li>Voor Aquasure en Seam Grip</li>
<li>Verdunt de lijm en versnelt droogproces</li>
Door een account aan te maken in deze winkel kunt u het betalingsproces sneller doorlopen, meerdere adressen opslaan, bestellingen bekijken en volgen en meer.Registreren