 |
| Login |  |
|
|
|
Scuba Support
Prinses Margrietstraat 38
1231XH Loosdrecht
The Netherlands
| T. | +31 (0) | 6 48511848 |
| F. | +31 (0) | 84 8307700 |
|
|
|
Sitemap |
Disclaimer |
Voorwaarden
|
|
 |
McNett Cotol 240 versneller 15ml
Algemeen | Specificaties | Gerelateerd | Reviews |
- Voor Aquasure en Seam Grip
- Verdunt de lijm en versnelt droogproces
- Kleine verpakking
- Hoort thuis in iedere spareskit
|
|
Cotol-240™ Cleaner & Cure Acceleratoris a urethane cure accelerator and pre-cleaner to be used in conjunction with Aquaseal®or . The solvent cleans and prepares the surface, readying it for Aquaseal® , speeding the tack time to 15 minutes and the full cure time to less than two hours. Cotol-240 is also ideal for removing tar, sap, glue, and other resins from various surfaces including glass, plastic and metal. Available in 1/2 oz. Blister Pack, 4 oz. and Quart (not shown). |
|
|
|
Cotol-240™ Directions for usewith Aquaseal® Urethane Repair Adhesive and Sealant:
AS PRECLEANER:
- Apply a small amount to the damaged area (spot test for colorfastness).
- Rub with a clean cloth until dry.
- Repeat steps 1 and 2.
- Apply Aquaseal as directed.
Note: for best adhesion, first roughen non-fabric surfaces with sandpaper.
AS CURE ACCELERATOR:
- Thoroughly mix 1 part cure accelerator with 3-4 parts Aquaseal®or using a stick, toothpick, or knife. Mix on a non-absorbent surface such as a plastic lid or plate.
- Immediately apply the mixture to the damaged area.
- Allow the repair to completely cure at least 2 hours before using.
FOR COLORS: Mix food coloring or paint colorant (available at paint stores) into the Aquasure and cure accelerator before applying.
CLEAN-UP: To remove Aquaseal® from hands, use cloth soaked with paint thinner, nail polish remover or 99% isopropyl alcohol.
STORAGE: Cap tightly. Store in cool, dry place. Use blister card package for storage.
|
| |
| |
|
 |
| Betaalopties |
|
|
